2025 Timpte TA SL Heaped 9" 96" Wide AG 1439 ft3
- Year 2025
- Make Timpte
- Model TA SL Heaped 9" 96" Wide AG
2025 Timpte TA SL Heaped 9" 96" Wide AG 1439 ft3
2025 Timpte TA SL Heaped 9" 96" Wide AG 1439 ft3
Designed and built in the Midwest, we understand how vital every piece of equipment is to your operation. Each Timpte trailer is custom built using American-made, high-quality materials to haul more, last longer and lower your cost of ownership. With more standard features and backed by end-to-end Factory Direct support and service, it’s no wonder Timpte is the #1 selling dry bulk commodity trailer on the market.
Features may include:- Aluminum Tarp Bows
- Side Panels
- Air Ride Dump Valve & Oil Filled Pressure Gauge
- Upper Coupler Assembly
- Trap System
- Lights & Electrical
- Access System
- Rear Corner Frame Posts
- Electric Tarp System: Thunder7000
- Tarp: ThunderArmor
- Tarp Bows
Dimensions
Length
40’ 0” | Traps openings: 30”
Height
66”
Kingpin Setting
20”- Single I-beam with 3/8” steel flanges, 1/4” steel full-width pickup plate.
Dimensions
Support Legs Located 94” from Kingpin. | Hopper clearance 25”.
Width
Traps openings: 24”
Capacities
Cargo Capacity
Support Legs: 50,000 lbs. lift capacity
Electric
Electrical
Electrical-All weather-pack automotive style connections, sealed to prevent corrosion. Common ground.
Lights and Safety
Lighting
Side Lamps – Includes 2 rows of 3 lamps each side;(3) amber L.E.D., (2) red L.E.D., (1) amber L.E.D. mid turn/marker lamp | Nose Lamps – (2) High mounted amber L.E.D. lamps. | Standard High mounted Rear Frame Lamps – (5) red L.E.D. marker lamps on rear header. | Rear Tail Lamps– (6)-4” diameter, 7 diode L.E.D. lamps, grommet mounted.
Suspension
Suspension
23,000 lb. rated air ride suspension, 17” ride height, 71-1/2” or 77-1/2” track with 23,000 lbs rating 28-spline camshafts and “Q+” linings. | Suspension subframe long beams are 4” x 8” x 3/16” rectangular structural steel tubing. Crosstubes are 6” x 8” structural steel tubing.
Wheels & Tires
Wheels
Eight (8) 24.5 x 8.25 white steel disc painted, hub piloted.
Hub Type
Cast ductile iron hubs with cast high-alloy, gray iron outboard mounted drums, hub piloted. Stemco Sentinel hubcaps.
Tires, Rear Specification
Eight (8) 11R24.5 radials.
Brakes
Brake System Type
16-1/2” X 7” “Q-style” quick-change brakes complying with FMVSS 121 with 5.5” auto slacks and 30/30 spring brake chambers – 4 sensor, 2 modulator anti-lock brake system with constant power supplied by center auxiliary pin. Exceeds the minimum requirements of FMVSS 121,S5.5
Features
Features
Access System: Aluminum ladders, handholds, and platforms are mounted on both the front and the rear, with a flip down step mounted to the base of the rear ladder. | Nose Panels: Smooth pre-painted white .063” aluminum. | Support Legs: Square legs, with roadside removable crank, low-profile 10? square cushion foot shoe, “No Lube” feature | Single knockrail in upper position on either side of the hopper. | Mudflaps: ½” Black heavy-duty rubber Mudflaps, 24”W x 30”L. | Tarp: 18 oz. locking roll tarp system with rear mounted crank. Three molded black plastic sidewall protectors. | Tarp Bows: Eight (8) – 9” rise galvanized steel arch type on 42’ trailers, seven (7) on 40’ trailers. | Coatings: Black protective metal coating on all steel parts.
Construction Material
Side Panels: Pre-painted white .048” and .063” aluminum, corrugated on 4” centers. | Lower Rails-Aluminum 7-11/16” high extrusion. | Side Posts– Aluminum extrusion 1-3/4” z-posts on 12” centers. | Side Top Rails-Aluminum 5-5/8” x 6-1/4” extrusion. | Interior Lining-.048” aluminum. | Rear Panels: Corrugated pre-painted white .048” aluminum panels and extruded aluminum posts. | Front Corners: 3” x 4” rectangular tube, mill finish aluminum | Nose Assembly: Extruded mill finish aluminum construction. 15 degree rearward slant. assembly. | 96”wide trailers formed .125 aluminum panels with side slope angle of 43.5 degrees, center and end panels with slope angle of 33 degrees, split tub design. | 102” wide trailers side panels of .080” aluminum with side slope angle of 43.5 degrees, center and end panels of .100? aluminum with slope angle of 33 degrees, riveted split tub design. | Front and Rear End Slope Panels – .080” aluminum supported by aluminum channel with Z shaped crossmembers, 33 degree slope angle. | Divider Panel – .080 aluminum supported by bulkhead crossmembers.